| Version 4 (modified by , 15 years ago) ( diff ) |
|---|
Hier werden die Anpassungen an der Standard-Paedml festgehalten. Bei Updates kann es vorkommen, dass die Änderungen überschrieben werden, diese müssen dann von Hand nachgebessert werden oder aber sie liegen im svn und können automatisch eingefügt werden.
Firewall-Einstellungen in /etc/init.d/linuxmuster-base
in der Funktion start_firewall nach :
# accept ipcop
iptables -A IN-$IFACE -s $ipcopip/32 -j ACCEPT
einfügen:
# accept proxy
iptables -A IN-$IFACE -s 10.32.1.251/32 -j ACCEPT
# accept LTSP-SERVER
# Klassenraumserver:
iptables -A IN-$IFACE -s 10.32.1.247/32 -j ACCEPT
iptables -A IN-$IFACE -s 10.32.1.248/32 -j ACCEPT
iptables -A IN-$IFACE -s 10.32.1.249/32 -j ACCEPT
iptables -A IN-$IFACE -s 10.32.1.250/32 -j ACCEPT
# Server fuer Computerraum 128:
iptables -A IN-$IFACE -s 10.32.1.246/32 -j ACCEPT
iptables -A IN-$IFACE -s 10.32.1.245/32 -j ACCEPT
iptables -A IN-$IFACE -s 10.32.1.244/32 -j ACCEPT
Workstationimport in /usr/share/linuxmuster/scripts/wimport.sh
Die Workstations werden beim ersten Booten mit PXE vom paedml in die Datei /etc/linuxmuster/workstations aufgenommen:
Raum;Rechner;Gruppe;MAC;IP;MASK;?;?;?;?;Imaging r128;r128-43;schueler;00:30:05:44:2a:da;10.32.128.43;255.240.0.0;1;1;1;1;0 snilaptop;snilaptopc03;snilaptop;00:0b:5d:93:b0:35;10.32.150.23;255.240.0.0;1;1;1;1;22 r109;semkurs03;schueler;00:30:05:44:76:c9;10.32.104.12;255.240.0.0;1;1;1;1;R
Bei Imaging bedeutet:
- 0: Workstationaccount anlegen aber nicht per Linbo berücksichtigen (Eintrag in /etc/dhcp3/dhcpd.conf.linuxmuster ohne Option pxelinux.configfile)
- 22: Workstationaccount anlegen und per Linbo berücksichtigen (Eintrag in /etc/dhcp3/dhcpd.conf.linuxmuster mit Option pxelinux.configfile)
- R: (Rembo) Workstationaccount anlegen und per Rembo verarbeiten (Eintrag in /etc/dhcp3/rembohosts.conf)
- IP im Bereich 10.16.209.*: Rechner ist im Lehrernetz (Eintrag in die /etc/dhcp3/lehrerhosts.conf)
Optionen 0 und 22 sind Standard-paedml, Option R ist eingefügt und muss in /usr/share/linuxmuster/scripts/wimport.sh beim Workstationimport verarbeitet werden, nach
# check dhcp stuff #[ -z "$DHCPDCONF" ] && exitmsg "Variable DHCPDCONF is not set!" #if [ -e "$DHCPDCONF" ]; then # backup_file $DHCPDCONF 2>> $TMPLOG 1>> $TMPLOG || exitmsg "Unable to backup $DHCPDCONF!" # rm -rf $DHCPDCONF 2>> $TMPLOG 1>> $TMPLOG || exitmsg "Unable to delete $DHCPDCONF!" #fi #touch $DHCPDCONF 2>> $TMPLOG 1>> $TMPLOG || exitmsg "Unable to create $DHCPDCONF!"
einfügen:
# Adaption fuer Rembointegration
REMBO_DHCPCONF="/etc/dhcp3/rembohosts.conf"
LEHRER_DHCPCONF="/etc/dhcp3/lehrerhosts.conf"
# Adaption DHCP-CONF f�r Rembo
[ -z "$REMBO_DHCPCONF" ] && exitmsg "Variable REMBO_DHCPCONF is not set!"
if [ -e "$REMBO_DHCPCONF" ]; then
backup_file $REMBO_DHCPCONF 2>> $TMPLOG 1>> $TMPLOG || exitmsg "Unable to backup $REMBO_DHCPCONF!"
rm -rf $REMBO_DHCPCONF 2>> $TMPLOG 1>> $TMPLOG || exitmsg "Unable to delete $REMBO_DHCPCONF!"
fi
touch $REMBO_DHCPCONF 2>> $TMPLOG 1>> $TMPLOG || exitmsg "Unable to create $REMBO_DHCPCONF!"
# Adaption DHCP-CONF fuer Lehrernetz
[ -z "$LEHRER_DHCPCONF" ] && exitmsg "Variable LEHRER_DHCPCONF is not set!"
if [ -e "$LEHRER_DHCPCONF" ]; then
backup_file $LEHRER_DHCPCONF 2>> $TMPLOG 1>> $TMPLOG || exitmsg "Unable to backup $LEHRER_DHCPCONF!"
rm -rf $LEHRER_DHCPCONF 2>> $TMPLOG 1>> $TMPLOG || exitmsg "Unable to delete $LEHRER_DHCPCONF!"
fi
touch $LEHRER_DHCPCONF 2>> $TMPLOG 1>> $TMPLOG || exitmsg "Unable to create $LEHRER_DHCPCONF!"
anstelle des folgenden Textes :
# write dhcpd.conf entry
echo -n " * DHCP: Writing entry for $hostname ... "
echo "host $hostname {" >> $DHCPDCONF
echo " hardware ethernet $mac;" >> $DHCPDCONF
echo " fixed-address $ip;" >> $DHCPDCONF
echo " option host-name \"$hostname\";" >> $DHCPDCONF
if [[ "$pxe" != "0" && "$imaging" = "linbo" ]]; then
# assign group specific pxelinux config
echo " option pxelinux.configfile \"pxelinux.cfg/$hostgroup\";" >> $DHCPDCONF
fi
echo "}" >> $DHCPDCONF
fi
echo "Ok!"
echo
diesen einfügen
# Adaption für Rembo-Integration (Baumgärtner)
# write dhcpd.conf entry
echo -n " * DHCP: Writing entry for $hostname ... "
if [[ "$pxe" == "R" ]]; then
echo -n "(Rembo-Adaption) ... "
echo "host $hostname {" >> $REMBO_DHCPCONF
echo " hardware ethernet $mac;" >> $REMBO_DHCPCONF
echo " fixed-address $ip;" >> $REMBO_DHCPCONF
echo " option host-name \"$hostname\";" >> $REMBO_DHCPCONF
echo "}" >> $REMBO_DHCPCONF
elif [[ "$ip" =~ "10.16.209.*" ]]; then
echo -n "(Lehrernetz) ... "
echo "host $hostname {" >> $LEHRER_DHCPCONF
echo " hardware ethernet $mac;" >> $LEHRER_DHCPCONF
echo " fixed-address $ip;" >> $LEHRER_DHCPCONF
echo " option host-name \"$hostname\";" >> $LEHRER_DHCPCONF
echo "}" >> $LEHRER_DHCPCONF
else
echo "host $hostname {" >> $DHCPDCONF
echo " hardware ethernet $mac;" >> $DHCPDCONF
echo " fixed-address $ip;" >> $DHCPDCONF
echo " option host-name \"$hostname\";" >> $DHCPDCONF
if [[ "$pxe" != "0" && "$imaging" = "linbo" ]]; then
# assign group specific pxelinux config
echo " option pxelinux.configfile \"pxelinux.cfg/$hostgroup\";" >> $DHCPDCONF
fi
echo "}" >> $DHCPDCONF
fi
echo "Ok!"
echo
DHCPD-Einstellungen in /etc/dhcp3/dhcpd.conf
Nach einem Update wird eventuell die Datei /etc/dhcp3/dhcpd.conf überschrieben, folgendes ist zu ändern:
#
# Sample configuration file for ISC dhcpd for Debian
#
# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
#
# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
server-identifier paedml;
ddns-update-style interim;
ddns-domainname "kg-fds.de";
ddns-updates on;
ddns-ttl 7200;
deny client-updates;
ddns-rev-domainname "in-addr.arpa.";
update-static-leases true;
# option definitions common to all supported networks...
server-name "paedml.kg-fds.de";
option domain-name "kg-fds.de";
option domain-name-servers 10.32.1.1;
option netbios-name-servers 10.32.1.1;
option ntp-servers 10.32.1.1;
option routers 10.32.1.254;
option font-servers 10.32.1.1;
option subnet-mask 255.240.0.0;
option broadcast-address 10.47.255.255;
use-host-decl-names on; #rembo
default-lease-time 86400;
max-lease-time 86400;
include "/etc/bind/rndc.key";
zone kg-fds.de {
primary 10.32.1.1;
key rndc-key;
}
zone 10.in-addr.arpa {
primary 10.32.1.1;
key rndc-key;
}
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;
allow booting;
allow bootp;
# pxelinux options for LINBO
#option vendor-encapsulated-options 09:0f:80:00:0c:4e:65:74:77:6f:72:6b:20:62:6f:6f:74:0a:07:00:50:72:6f:6d:70:74:06:01:02:08:03:80:00:00:47:04:80:00:00:00:ff;
#option space pxelinux;
#option pxelinux.magic code 208 = string;
#option pxelinux.configfile code 209 = string;
#option pxelinux.pathprefix code 210 = text;
#option pxelinux.reboottime code 211 = unsigned integer 32;
#site-option-space "pxelinux";
#option pxelinux.magic f1:00:74:7e;
#if exists dhcp-parameter-request-list {
# # Always send the PXELINUX options (specified in hexadecimal)
# option dhcp-parameter-request-list = concat(option dhcp-parameter-request-list,d0,d1,d2,d3);
#}
#option configfile code 150 = string;
#filename "pxelinux.0";
#next-server 10.32.1.1;
# subnet for workstation import
#subnet 10.32.0.0 netmask 255.240.0.0 {
# range 10.32.1.100 10.32.1.200;
# option router 10.32.1.251;
# option ;
# max-lease-time 3600;
# default-lease-time 3600;
# option host-name "pxeclient";
#}
# dynamic part of dhcpd.conf is included
include "/etc/dhcp3/dhcpd.conf.linuxmuster";
# Kepler-specific part of dhcpd.conf is included
include "/etc/dhcp3/dhcpd.conf.kepler";
Der ganze obere LINBO-Bereich muss auskommentiert werden, eigentlich wird nur noch die Kepler-angepasste Config geladen. (source:keplertools/etc/trunk/dhcp3/dhcpd.conf.kepler)
Note:
See TracWiki
for help on using the wiki.
